TENS PAD 1.97” X 3.54” RECTANGULAR LEAD FABRIC BACKING - 10PK
Embedded Files
📞CALL 1 (800) 915-5924
RHB1083
• Latex-free replacement pads are safe for all skin types.
• Flexible replacement electrode pads are pre-gelled
for convenience.
• Standard connectors for compatibility with most
TENS units.
• Reusable electrode pads are self-adhering without leaving
a sticky residue behind.
Features
SAFE AND EFFECTIVE
Safely and easily replace worn or damaged electrode pads with FDA approved replacement electrode pads for effective pain-relieving treatmentsCOMPATIBLE WITH MOST UNITS
Features standard 2mm lead connectors for use with most TENS, EMS, and muscle stimulation devicesSELF-ADHERING GEL
Pregelled with a conductive hydrogel, the tens unit pads adhere to the skin without leaving a sticky residue behindFLEXIBLE FABRIC DESIGN
Measuring 2” by 3.58”, the rectangular electrode pads are made with a flexible non-woven cloth that contours to the body for optimal placementSKIN-SAFE MATERIALS
Latex and PVC-free, the replacement electrode pads are non-irritating and safe for all skin typesREUSABLE SET OF 40
Safely store the reusable electrodes in the resealable pouch to prolong their lifespan
FAQ
FAQ
What is the lifespan of the replacement TENS unit pads?
Each Vive replacement pad can be reused 20-25 times when properly stored in the resealable pouch between uses.
Will these work with any TENS unit?
The Vive replacement electrode pads feature a universal 2mm lead connector to work with a wide variety of TENS and EMS units.
Are they packaged individually?
The Vive electrode pads are packaged in sets of four with a protective film backing. All ten sets are enclosed in a resealable bag to prolong the lifespan of the electrode pads.
Do I need to use gel with the replacement pads?
Each replacement pad is pre-gelled with a conductive hydrogel and does not require additional hydrogel for effective use.
Are the reusable electrode patches latex-free?
Yes! The replacement electrode pads are latex-free for safe use on any skin type.
How large are the tens unit pads?
The rectangular electrode pads measure 2.01” by 3.58”.
Do the electrode pads have FDA approval?
Yes, the Vive replacement TENS unit pads are FDA approved.
How do I use the replacement pads?
Attach the lead wires to electrodes before applying them to clean, dry skin. Remove the protective backing from the electrode and set it aside. Apply the electrode to the skin, center first, then smooth down the edges for a secure fit. Attach the lead wires to the device and turn it on, adjusting the settings according to individual needs.
How many electrode pads do I get?
Each resealable package contains a total of 40 replacement tens unit pads. The electrode pads are placed on a protective film in sets of four pads for safe, convenient storage.
Can I use a TENS pad that is no longer sticky?
Yes! If an electrode pad is no longer sticky, carefully add one or two drops of water to the adhesive gel and rub them in lightly to rehydrate the gel. If the pad is still not adhering to the skin, discard the electrode pad and replace it with a new pad.
Specifications
Specifications
What’s Included
- Vive TENS Unit Replacement Pads- Set of 40
- 60-day guarantee
Uses: Replacement electrode pads for TENS, EMS, and muscle stimulation devices
Dimensions: 2.01” x 3.58”
Materials: Non-woven cloth backing, Conductive carbon film (Low impedance), Conductive hydrogel, Lead wire with 2mm DIN size connector
How To Use:
Read the device user manual thoroughly before use
Skin must always be clean, dry, and free from lotions or powders
Attach lead wires to electrodes before applying to the skin
Remove the protective backing from the electrode. Save for future use
Apply the electrode to skin, center first, then smooth down edges
Attached are the lead wires to the device and turn it on. Adjust the settings according to the treatment plan. Do not exceed the intensity of .1 Watt/cm2
When treatment is complete, turn the device off
Lift the electrode at the edges and peel to remove it from the skin
Care Instructions:
Replace the saved backing on the sticky side of the electrode
Disconnect the device from the lead wires and electrodes
Store the electrodes in the original packaging
Keep electrodes away from direct sunlight
If the electrode loses adhesion properties, gently rub one or two drops of water onto the gel surface to reactivate the adhesion. If that does not work, discard the electrode
Discard the electrode in the original packaging after 20-25 uses
Product Number: RHB1038FBR40
Page updated
Google Sites
Report abuse