ELECTRODE PADS 2X2 SQUARE FOAM BACKING - 10 PACKS OF 4

RHB1033FM40

• Continue pain-relieving treatments with FDA approved

replacement electrode pads.

• Pre-gelled with a conductive hydrogel, the pads easily

secure to the skin without leaving a sticky residue

following each treatment.

Features

  • SAFE REPLACEMENT PADS

  • Continue pain-relieving treatments with FDA approved replacement electrode pads

  • UNIVERSAL COMPATIBILITY

  • Pigtail 2mm stud or snap connector is compatible with most TENS, EMS, and muscle stimulation devices

  • PREGELLED AND SELF ADHESIVE

  • Pregelled with a conductive hydrogel, the pads easily secure to the skin without leaving a sticky residue following each treatment

  • FLEXIBLE SQUARE PADS

  • Square electrode pads are constructed with a non-woven cloth backing that is flexible for optimal placement

  • LATEX FREE

  • Latex-free and PVC-free, the non-irritating electrode pads are safe for all skin types

  • REUSABLE 10 SETS OF 4

  • Each set of four includes a protective liner in the resealable pouch for safe storage

Specifications

SPECIFICATIONS:

Uses:

  • Replacement electrode pads for TENS, EMS, and muscle stimulation devices

Dimensions:

  • 1.97” by 1.97”

Materials:

  • Non-woven cloth backing

  • Conductive carbon film (Low impedance)

  • Conductive hydrogel

  • Lead wire with 2mm DIN size or snap connector

How To Use:

  • Read the device user manual thoroughly before use.

  • Skin must always be clean, dry and free from lotion or powders.

  • Attach lead wires to electrodes before applying to skin.

  • Remove the protective backing from the electrode. Save for future use.

  • Apply the electrode to the skin, center first, then smooth down the edges.

  • Attached are the lead wires to the device and turn it on. Adjust the settings according to the treatment plan. Do not exceed the intensity of .1 Watt/cm2.

  • When treatment is complete, turn the device off.

  • Lift the electrode at the edges and peel to remove it from the skin.

Care Instructions:

  • Replace the saved backing on the sticky side of the electrode.

  • Disconnect the device from the lead wires and electrode.

  • Store the electrode in the original packaging.

  • Keep electrodes away from direct sunlight.

  • If the electrode loses adhesion properties, gently rub one or two drops of water onto the gel surface to reactivate the adhesion. If that does not work, discard the electrode.

  • Discard the electrode in the original packaging after 20-25 uses.

What’s Included:

  • 10 sets of 4 Replacement electrode pads with lead connectors

  • 60 day guarantee

UPC: 818323021219

Product Number: RHB1033PIN

Shipping Weight: 11.2 ounces

User Manual: Lead Electrodes (2" x 2") - 10 Sets of 4